Rotary and not rotary halopgen ceiling luminaires.

For the general and local illumination of public premises of various appointments (trading and auditoria halls, halls of hotels, theatres, offices, etc.), can be installed in false ceilings, and also used for mirrors, show-windows, furniture highlight, for an interior creation.

Modern design, wide color assortment of a covering for the luminaries case. The case of the lamp is made of metal. Lamp is connected to power supply through terminal-block clips. Double economy of electric power comparing to regular incandescent lamps, that produce the same luminous flux. Lamp socket, type G ÒÓ ÐÁ 07615377.070-98 , allows to replace a lamp without dismantle of the whole luminaries.

Appearance, overall dimensions and installation instruction for luminarie ÈÏÎ 47-50-032

1-case, 2-lamp, 3-spring, 4- lamp socket, 5-spring, 6- clipses of terminal-block, 7- false ceiling.
Fig. 1.

Appearance, overall dimensions and installation instruction for luminarie ÈÏÎ 47-50-041

1-case, 2-lamp, 3-spring, 4- lamp socket, 5-spring, 6- clipses of terminal-block, 7- false ceiling.
Fig. 2.

Design of lamps:

Two types of ceiling luminaires are manufactured by Minsk factory "Calibre": ÈÏ0 47-50-032 and ÈÏ0 47-50-041. Appearance, overall dimensions and installation instruction are given in fig. 1 and fig. 2 accordingly.

Halogen lamps ÊÃÀÔ 12-50 and ÊÃÈÔ 12-50 (or foreign analogue) are used as light sources. Fig. 3 shows dependencies of light stain diameter and illumination level on distance to a light source; fig. 4 - shows a typical curve of light spread for halogen lamps ÊÃÀÔ 12-50 (ÊÃÈÔ 12-50). Lamp is connected to AC or DC 12V power supply (power min 50 W) through terminal-block clipses (6).

Minsk factory "Calibre" offers power supply unit ÁÏÃ 220/12-2õ100 W for power supply of several (up to 4) ceiling halogen luminaires, or the transformer ÒÝ 220/50 for power supply of one luminaire. The specified power units are developed and manufactured by Minsk factory "Calibre".

Advantages:

• High density of luminous flux in a shined zone;
• Double economy of electric power comparing to regular incandescent lamps, that produce the same luminous flux;
• Service life of halogen lamps in 2-2,5 times more than service life of regular incandescent lamps.

The design of halogen ceiling luminaires grants simple and convenient mounting to false ceilings by means of springs without application of any tool. Ceiling luminaire ÈÏÎ 47-ÇÎ-041 gives an opportunity to change light direction without application of any tool.

The luminaries are certified and meet requirements of ÃÎÑÒ 17677-82, ÃÎÑÒ 8607-82.

Light stain diameter and illumination level depending on distance to a light source for halogen lamps ÊÃÔÀ 12-50 (ÊÃÈÔ 12-50) with angle of deflection 38°

Fig. 4.
Typical curve of light spreading for halogen lamps ÊÃÔÀ 12-50 (ÊÃÈÔ 12-50) with angle of deflection 38°

^