Luminescent industrial lamp ЛДП 12-11-701

The description

It is intended for local illumination of workplaces in industrial premises at enterprises of light industry, instrument making, exact mechanics, etc when operations demanding visual tension are carried out.

The lamp is constructed on the basis of 11W compact luminescent lamp (CLL) and an electronic starter device (modification ЭПРА 220-11М).

The electronic starter device ЭПРА 220-11М is manufactured by РУП Minsk factory "Calibre".

1-basis, 2-flexible support, 3-lamp head, 4-power cord, 5- two-pin plug, 6- lock-nut, 7-rotator, 8-diffusor, 9-power switch, 10-holes (4 psc.) for lamp fastening.
Fig. 1.

Bearing units of the lamp are: the metal basis and the flexible support made of two metal springs jointed together, covered with plastic.

The lamp is fastens to a basic surface permanently by means of fixing details (screws, nuts and washers).

Design of the lamp provides a plenty of degrees of freedom for moving the lamp head. the head can be moved on distance up to 1 m from a vertical axis and fixed basis without any tool or additional fixing due to the flexible support, used for its installation. The lamp can be installed into the most suitable position.

Lamp color - black.

Electronic management for the luminiscent lamp provides:

• High, uniform level of a luminous flux;
• Instant inclusion and silent work of the lamp;
• Smooth light, without blinking, absence of stroboscopic effect;
• 20 % increased lamp service period due to optimal control mode, comparing to traditional electromagnetic starter devices;
• Sixfold electric power economy if used instead of incandescent lamps, providing the same dencity of luminous flux;
• Absence of electromagnetic interference during operation.

^