Household desktop luminescent lamp ЛНБ 12-11-801

It is intended for local illumination of workplaces in living quarters when operations demanding visual tension are carried out.

The lamp is constructed on the basis of 11W compact luminescent lamp (CLL) and an electronic starter device (modification ЭПРА 220-11М).

1-plug, 2-lamp head, 3,4-pantograph, 5-switch, 6-cord, a 7-clamp, 8-screw, 9-diffusor, 10-clip, 11-bearing plate
Fig. 1.

The bearing unit of the lamp is a metal pantograph device constructed of levers, connected by a joint and strapped by means of compressive springs.

The lamp is fastened to a bearing plate by means of the clamp; the pantograph device is mounted into a jack of the clamp.

• A plenty of degrees of freedom for moving the lamp head, the lamp can be installed into the most suitable for you position.
• Opportunity to revolve the pantograph device 360°; on the vertical axis of the clamp
• The lamp head can be moved on distance up to 1 m from a vertical axis of a clamp without any tool or additional fixing through the extension of the pantograph device levers without any tools and additional fixings due to application of compensating springs.

Lamp color: black, white.

Advantages:

Electronic management for the luminiscent lamp provides:

• High, uniform level of a luminous flux;
• Instant inclusion and silent work of the lamp;
• Smooth light, without blinking, absence of stroboscopic effect;
• 20 % increased lamp service period due to optimal control mode, comparing to traditional electromagnetic starter devices;
• Sixfold electric power economy if used instead of incandescent lamps, providing the same density of luminous flux;
• Absence of electromagnetic interference during operation.

^