Reflector incandescent lamp luminaires.

The reflector incandescent lamp ceiling luminaire СПО 47-40-042 is intended for:

For the general and local illumination of public premises of various appointments trading and auditoria halls, halls of hotels, theatres, offices, lay-outs of exhibitions, etc.

Composition and installation instructions for СПО 47-40-042

1-case, 2-lamp, 3- lam) socket, 4-terminal-block clipses, 5-grounding screw, 6-spring, 7-false ceilings, 8- ground wire.
Fig. 1.

The luminaire is designed on the basis of 40W reflector incandescent lamp. Appearance of the device and way of installation are given on fig. 1. The luminaire is installed on elements of facing (decorative plates) false ceilings (7) by means of springs (6).

Light source - a reflector incandescent lamp POLAMP P1LA 230V 40W MATOWANA E14 ZSR 50 (or similar), capacity 40 W. Power supply 220 V, lamp socket type Е14. Fig. 2 shows dependences of light stain diameter and illumination level on distance to a light source.

The luminare is connected to the network trough terminal-block clipses (4), earthing is carried out connecting ground wire (8) by screw (5) to the luminar case (1).

Modern design, wide color assortment of a covering for the luminaire case. The case of the lamp is made of metal. Lamp is connected to power supply through terminal-block clipses. One and a half economy of electric power at the expense of put mirror light reflecting coverage, comparing to regular incandescent lamps, that produce the same luminous flux.

ADVANTAGES:

• Application of reflector incandescent lamps gives following advantages:
• High dencity of lumenous flux in a shined zone, due to its concentration;
• The luminaire design provides simple and convenient fastening to a false ceiling with help of springs, without application of any tool.

Fig. 2.

Dependence of lumenous flux level and diameter of light stain on distance from a light source for reflector incandescent lamps POLAMP PILA E14 ZSR 50 with angle of deflection 35°

^