Devises for measuring parametres of units and ciruits with lumped constants (immittance meters)
IMMITTANCE METER E7-18
It is intended for measurement immattance parameters of electroradioelements: resistors, condensers, coils of inductance. Self-diagnostics. Two levels of the measuring signal. Laboratory testing of circuit elements, semi-conductor structures. The interface of type (Joint С2).
4 digit indicator with backlighting
Built – in interface RS-232C
Application of bias voltage to an object is possible
Automatic and manual choice of measurement ranges
Immittance meter E7-18 – is a small-sized device, power supply is possible from both a network or built - in battery.
| SPECIFICATIONS: |
| Operating frequencies, kHz |
0,1; 1 |
| Error of operating frequencies setting, % |
±0,02 |
| Levels of a measuring signal, V: |
|
| High |
1±0,2 (root-mean-square value). |
| Low |
0,1±0,02 (eff.). |
| Ranges of measurement: |
|
| Conductance, S |
0,01x10-6...100x10-6 |
| Resistance, Ohm |
1x10-3...20x106 |
| Capacitance, F |
0,1x10-12...20x10-3 |
| Inductance, H |
0,1x10-6 ... 16x103 |
| Quality factor |
1x10-3..0,5 |
| Loss tangent |
1x10-3...2 |
| Error of measurement, % |
±0,25 |
| Bias voltage (internal), V |
2 |
| AC power supply, V,Hz |
220/50 |
| DC power supply, V |
9 |
| Power consumption, max: |
|
| AC power supply, VA |
5 |
| DC power supply, W |
0,5 |
| Dimensions, mm |
100x180x40 |
| Weight, kg, max |
0,5 |
| Category temperature range, °C |
10 up to 35 |
|
|
|
^
Copyright © 2003 РУП "Минский завод Калибр"
Продвижение сайта SunWeb.by
|